¡Parcialmente financiado! :)
Este proyecto finalizó el día jueves, 04 de marzo de 2021 y podrá realizar un plan alternativo.

Impresora 3D para mi proyecto

Mi plan es comprar una impresora 3D para poder usarla para imprimir mis prototipos de mis inventos. Puedes ver uno de ellos más abajo.
  • Compartir este proyecto
  • Embed
Recaudó $ 4 USD
$ 4 USD
de $ 35 USD
Financiado (10%)
2 colaboradores recaudaron $ 4 USD haciendo realidad éste proyecto!
  • Proyecto
  • Novedades

Hola. Mi nombre es Ivan Nieto Saavedra. Soy un técnico en electrónica y siempre quise usar mis conocimientos para inventar modelos de utilidad, es decir, aparatos que ya existen pero con modificaciones que les dan mejoras en su funcionamiento, o mejor dicho, que los hace más eficientes. Durante todo el año del 2020 en plena pandemia estuve modelando en mi computadora uno de mis prototipos. Era una carcasa para caloventor la cuál gracias a su diseño podía brindarle al caloventor las siguientes mejoras:

-Reducir considerablemente el ruido generado por el caloventor.

-Concentrar el aire que expulsa permitiendo que salga con mayor fluidez y velocidad sin incrementar el ruido.

-Su tamaño lo vuelve el caloventor más compacto lo que permite que ocupe menos espacio que cualquier otro.

-Debido a su pequeño tamaño requiere de mucho menos material y por lo tanto ahorra en costos de fabricación.

-Debido a su pequeño tamaño pesa menos, volviéndolo el caloventor más ligero del mercado.

-Debido a su diseño tiene menos probabilidades de caer por un golpe que los demás caloventores.

-Debido a su diseño solo requiere de un tornillo para mantener las dos piezas de la carcasa bien encastradas, mientras que los demás caloventores tienen como mínimo cuatro tornillos en sus esquinas para cumplir la misma función. Esto , junto a su pequeño tamaño, permite un significativo ahorro en costos de fabricación a nivel industrial.

Debido a que yo no poseía una impresora 3D tuve que recurrir a un colega mío para imprimir los prototipos, lo que me llevó a gastar una gran cantidad de dinero en sus servicios. Cuando imprimí la versión final de la carcasa me gasté lo poco que me quedaba en el trámite para patentarla. Tengo otros proyectos en mente, más inventos que crear como la carcasa, pero no tengo dinero para imprimirlos para ver si funcionan o modificarlos e imprimirlos de nuevo en caso de que no funcionen. La opción más barata sería tener una impresora propia ya que de esa manera no tendría que pagarle a nadie por sus servicios. Además, podría usarla para imprimirles objetos a los demás y así generar mis propios ingresos para financiar mis proyectos, así como también para poder llegar a fin de mes. Al principio de todo hay un video en el que les muestro un caloventor normal y el que yo hice con la carcasa que modelé y que imprimío mi colega y que después patenté. En el video comparo el ruido de ambos modelos así como la fuerza con la que expulsan el aire para demostrar que no miento respecto a las mejoras que mi modelo tiene. Si por alguna razón no pueden ver el video aquí les dejo un link para que lo vean en mi canal de Youtube:https://youtu.be/NufO6b6Hu9A

Tambien les dejo imágenes en las que se muestra tanto la carcasa como también imágenes del modelado de la misma en mi computadora para que vean mi esfuerzo para poder hacerla y vean que mis proyectos me los estoy tomando en serio. Esto es muy importante para mí. Hay muchos argentinos que sueñan con ser inventores y que tienen la inteligencia y creatividad para lograrlo, pero lamentablemente no tienen el dinero para diseñar sus prototipos y se quedan estancados. Tu tienes ahora la oportunidad de ayudar a uno de ellos a hacerlos realidad con tan solo donar para que tenga su propia impresora. Como dice el dicho: "La unión hace la fuerza".

Muchas gracias por leer. Espero tu colaboración. Atentamente, Ivan Nieto Saavedra, Técnico en Electrónica.

-------------------------------------------------------------------------------------------------------------------------------------------------

Hi. My name is Ivan Nieto Saavedra. I am an electronics technician and I always wanted to use my knowledge to invent utility models, that is, devices that already exist but with modifications that give them improvements in their operation, or rather, that makes them more efficient. Throughout the year of 2020 in the midst of a pandemic, I was modeling one of my prototypes on my computer. It was a casing for a heater which, thanks to its design, could provide the heater with the following improvements:   -Reduce considerably the noise generated by the heater.   -Concentrate the air that it expels allowing it to come out with greater fluidity and speed without increasing noise.   -Its size makes it the most compact heater, which allows it to take up less space than any other.   -Due to its small size, it requires much less material and therefore saves on manufacturing costs.   -Due to its small size, it weighs less, making it the lightest heater on the market.   -Due to its design, it is less likely to be knocked over than other heaters.   -Due to its design, it only requires one screw to keep the two parts of the housing well embedded, while the other heaters have at least four screws in their corners to fulfill the same function. This, together with its small size, allows significant savings in manufacturing costs at an industrial level.   Since I did not own a 3D printer, I had to turn to a colleague of mine to print the prototypes, which led me to spend a lot of money on his services. When I printed the final version of the case, I spent the little that I had left in the process to patent it. I have other projects in mind, more inventions to create like the case, but I don't have the money to print them to see if they work or modify them and print them again in case they don't work. The cheapest option would be to have your own printer since that way you would not have to pay anyone for their services. In addition, I could use it to print objects for others and thus generate my own income to finance my projects, as well as to make ends meet. At the beginning of everything there is a video in which I show you a normal heater and the one I made with the case that I modeled and that my colleague printed and later patented. In the video I compare the noise of both models as well as the force with which they expel the air to show that I am not lying about the improvements that my model has. If for some reason you cannot see the video, here is a link for you to see it on my YouTube channel: https: //youtu.be/NufO6b6Hu9A   I also leave you images that show both the case and images of the modeling of it on my computer so that you can see my effort to do it and see that I am taking my projects seriously. This is very important to me. There are many Argentines who dream of being inventors and who have the intelligence and creativity to achieve it, but unfortunately they do not have the money to design their prototypes and they remain stagnant. You now have the opportunity to help one of them make them come true just by donating so they can have their own printer. As the saying goes: "Unity is strength".   Thanks so much for reading. I await your collaboration. Sincerely, Ivan Nieto Saavedra, Electronics Technician.

 

En caso de no recaudar el 100% de nuestro objetivo económico haremos lo siguiente:

  • Con el 10%

    Juntaría el dinero con todos mis ahorros para comprar la impresora. Una vez que lo haga, empezaría a modelar y crear mis inventos. -------------------------------------------------------------------------------------------- I would pool the money with all my savings to buy the printer. Once I do, I would start modeling and creating my inventions.

  • Con el 25%

    Juntaría el dinero con todos mis ahorros para comprar la impresora. Una vez que lo haga, empezaría a modelar y crear mis inventos. -------------------------------------------------------------------------------------------- I would pool the money with all my savings to buy the printer. Once I do, I would start modeling and creating my inventions.

  • Con el 50%

    Juntaría el dinero con todos mis ahorros para comprar la impresora. Una vez que lo haga, empezaría a modelar y crear mis inventos. -------------------------------------------------------------------------------------------- I would pool the money with all my savings to buy the printer. Once I do, I would start modeling and creating my inventions.

  • Con el 75%

    Juntaría el dinero con todos mis ahorros para comprar la impresora. Una vez que lo haga, empezaría a modelar y crear mis inventos. -------------------------------------------------------------------------------------------- I would pool the money with all my savings to buy the printer. Once I do, I would start modeling and creating my inventions.

SOPORTE

Aún no verificaste tu cuenta!

Por favor revisa tu casilla de email. ().

Te enviamos un link para confirmar tu cuenta.

Si no lo recibes en unos minutos, por favor haz click en re-enviar.

Ya te hemos reenviado el mail de verificación.

Por favor revisa tu casilla de correo electrónico.

En caso de no recibirlo por favor escribe un mail a contacto@idea.me

¿Cómo podemos ayudarte?

Hemos recibido correctamente tu consulta. A la brevedad un agente se contactará contigo. Muchas gracias!

Continuar

Tu consulta no ha podido ser enviada :( Por favor intenta nuevamente!

Volver a intentar